NYLON 12 尼龍管

Nylon 12 (Polyamide 12 尼龍 12) 為熱可塑性半結晶型塑膠:
優點 :低吸濕 Nylon 、能加入高比率的填充物、耐化學性、高剛性、低翹曲
1.
優良的耐低溫特性,耐彎曲
2.
良好的彈性與回復特性
3.
耐黃變(耐UV
4.
優良的耐化學性,對稀釋後的鹽酸、硫酸與鹼具良好的穩定性。
 
曝露於ASTM油,溫度達100°C,產品具很低的膨脹度。
5.
高衝擊強度
 
限制 :相較於其他 Nylon 價格較高耐熱性較差
成行條件
乾燥:80℃ 4小時
模溫:80℃
射出溫度:250~290℃

聚醯胺俗稱尼龍,英文名稱PolyamideNylon,簡稱PA,是目前最常用的通用工程塑膠。 
由於
PA的品種繁多,結構不同,性能各異。目前塑料工業常用的是脂肪族PA
具體的品種有
PA6PA66PA610PA1010PA11PA12PA9PA612PA121等。
尼龍管又稱為:
PA
管、尼龍高壓管、尼龍氣壓膠管、尼龍軟管、尼龍風管、尼龍耐溫管、
尼龍氣壓軟管、尼龍氣壓管、尼龍空壓軟管、尼龍空壓管、尼龍噴漆管、
PA高壓管、PA氣壓膠管、PA軟管、PA風管、PA耐溫管、PA氣壓軟管、PA氣壓管。
尼龍管用途:
尼龍管適用於液壓、自動化、真空、燃料、蒸汽,空氣和剎車管線。
尼龍管的耐熱性與
UV穩定性讓尼龍管不容易因為壓力破裂,
所以尼龍管適合被使用於陽光照射的地方。

產品編號 外徑 內徑 爆破壓力kgf/cm2 公尺/卷
4X0.75 4 2.5 56.08 200
4X1 4 2 69.34 200
5X1 5 3 34.67 100
6X1 6 4 64.24 100
8X1 8 6 58.12 100
9X1.5 9 6 50.24 100
10X1 10 8 45.89 100
10X1.25 10 7.5 57.10 100
10X1.5 10 7 57.10 100
11X1.5 11 8 57.10 100
12X1 12 10 58.12 100
12X1.5 12 9 58.12 100
12X2 12 8 58.12 100
14X1.5 14 11 57.10 50
14X2 14 10 57.10 50
15X1.5 15 12 55.06 50
16X2 16 12 55.06 50
18X1.5 18 15 36.71 50
18X2 18 14 36.71 50
1/4X1 1/4   54.05 100
5/16X1 5/16   57.10 100
3/8X1/4 3/8   62.20 100
1/2X3/8 1/2 56.08 100
5/8X1/2 5/8 50.99 50
3/4X5/8 3/4   50.99 50

以上數值是由我們的實驗室測試樣品後取得

Nylon tube is also known as: PA tube, nylon high pressure tube, nylon air pressure hose, nylon hose, nylon air tube, nylon temperature resistant tube, nylon air pressure hose, nylon air pressure tube, nylon air pressure hose, nylon air pressure tube, nylon spray paint tube, PA high pressure Pipe, PA air pressure hose, PA hose, PA air pipe, PA temperature resistant tube, PA air pressure hose, PA air pressure tube.
Polyamide is commonly known as nylon, and its English name is Polyamide or Nylon, or PA for short. 
It is currently the most commonly used general engineering plastic.
 
Due to the wide variety of PA, the structure is different, and the performance is different.
 
At present, aliphatic PA is commonly used in the plastics industry, and specific varieties include 
PA6, PA66, PA610, PA1010, PA11, PA12, PA9, PA612, PA121, etc.
 
Nylon tubing is suitable for hydraulic, automation, vacuum, fuel, steam, air and brake lines. The heat resistance and UV stability of the nylon tube make it difficult for the nylon tube to break due to pressure, so the nylon tube is suitable for use in places exposed to sunlight.
Nylon 12 (Polyamide 12, Nylon 12) is a thermoplastic semi-crystalline plastic: Advantages: low moisture absorption Nylon, can add a high ratio of fillers, chemical resistance, high rigidity, low warpage 1. Excellent low temperature resistance and bending resistance 2. Good elasticity and recovery characteristics 3. Yellowing resistance (UV resistance) 4. Excellent chemical resistance, good stability to diluted hydrochloric acid, sulfuric acid and alkali. It is exposed to ASTM oil at a temperature of 100°C, and the product has a very low degree of expansion. 5. High impact strength Limitations: Compared with other Nylon, the price is higher and the heat resistance is poor Completion conditions Drying: 80°C for 4 hours Mold temperature: 80℃ Injection temperature: 250~290℃

 


Hot Line:+886 2 23657700 Mexa
e-mail: Mexa@capads.com

 

Home       Inquiry       e-Mail Us:  autopure@ms3.hinet.net
Mexa Co., Ltd.

3F., No. 128 Gu Ling street, Taipei, Taiwan 100

Tel.+886223657700  Fax.+886223657702

Factory: No. 97 Kung Ming Road, Tsun Tou Liau Industry Area, Tainan, Taiwan Tel.06-2467820

www.autopure.com

 

©This page is copyrighted by Mexa Co., Ltd. since Jan. 2010