Stainless steel deodorant floor drain core, drain pipe, drain head cover,
drain hole, drain pipe cover.
Drain hole deodorant cover insect-resistant, 
kitchen bathroom balcony and toilet
Deodorant gall core
33413258 -33413292 -40473858 -40473893 four model
deodorant floor drain cores.
The odor that can be blown back by the drainage pipe can be removed, 
and the cockroach and fruit flies with natural isolation of the water wall cannot enter!
1. Measure the inner diameter of the water pipe to be installed with 
deodorant floor drain core when you buy it. 
You can use a toothpick of the same length to measure it.
Then use the obtained length ratio to compare the 
deodorant floor drain core [suitable aperture 33 ~ 41mm or 40 ~ 47mm].
2. Insert a measuring tube into the water pipe to be installed with 
the deodorant floor drain core, and compare with the measured depth (length).
[Height 58mm, 92mm or 98mm] of deodorant floor drain core;
(Generally, the depth (length)> 60mm 
is greater than six centimeters, so the height is 58mm).
(Generally, if the depth (length)> 100mm 
is greater than ten centimeters, select a height of 92mm or 98mm).

Deodorant floor drain core toilet drain stainless steel #304 floor drain 
thickened insect-proof and deodorant cover inner core.
Dressing room bathroom stainless steel deodorant floor drain, water pipe deodorant, 
insect control, old-style drain hole, floor drain renovation.
The original 62mm round (falling) drainage pipe cover can be used. 
DIY installation is simple and perfect in 10 minutes, which is economical and affordable.

¡@

¡@