EurolinE® Slimline 4PCS a SET in a COLOR BOX

13" 4pcs/set/box - 1 set in a color box / 37.00x8.0x37.60cm / 0.40’cf / 1.80  Kgs.

14" 4pcs/set/box - 1 set in a color box / 39.50x8.0x40.10cm / 0.45’cf / 2.00  Kgs.

15" 4pcs/set/box - 1 set in a color box / 42.50x8.0x43.10cm / 0.52’cf / 2.05  Kgs.

16" 4pcs/set/box - 1 set in a color box / 44.50x7.5x45.10cm / 0.53’cf / 2.80  Kgs.

EurolinE® Slimline 4PCS a SET in a COLOR BOX, 4 sets/boxes per Master carton

13" 4pcs/set/box - 4 sets per master carton 38.18x35.15x38.48cm / 1.82’cf / 6.20 Kgs.

14" 4pcs/set/box - 4 sets per master carton 41.21x37.57x41.51cm / 2.27’cf / 7.50 Kgs.

15" 4pcs/set/box - 4 sets per master carton 43.93x37.57x44.54cm / 2.60’cf / 8.50 Kgs

16" 4pcs/set/box - 4 sets per master carton 45.75x31.51x46.36cm / 2.36’cf / 9.20 Kgs.

EurolinE® Slimline 4PCS a SET in a COLOR BOX, 5 sets/boxes per Master carton

13" 4pcs/set/box - 5 sets per master carton 46.63x38.18x38.48cm / 2.15’cf /  7.50 Kgs.

14" 4pcs/set/box - 5 sets per master carton 46.66x41.21x41.51cm / 2.50’cf /  9.00 Kgs.
15" 4pcs/set/box - 5 sets per master carton 46.66x43.93x44.24cm / 2.85’cf / 10.25 Kgs.

16" 4pcs/set/box - 5 sets per master carton 45.75x38.78x46.36cm / 2.90’cf / 11.50 Kgs. 

EurolinE® Slimline wheel cover container load:

1x20'ft 13" 2204~2223 sets.  1x40' 13" 4375~4412 sets. 1x40'HQ 13" 4885~4927 sets.

1x20'ft 14" 1792~1806 sets.  1x40' 14" 3557~3586 sets. 1x40'HQ 14" 3972~4004 sets.

1x20'ft 15" 1577~1590 sets.  1x40' 15" 3131~3156 sets. 1x40'HQ 15" 3496~3524 sets.

1x20'ft 16" 1720~1737 sets.  1x40' 16" 3415~3448 sets. 1x40'HQ 16" 3813~3850 sets.

SlimLine™ Installation

	1. The last two numbers on your tire will indicate proper wheel cover size (12",13",14", 15", 16" and 17"). See Fig. 1 Example: A tire with a size code of 15 inch uses a 15 inch wheel cover
	2. Remove used wheel cover (hubcap) from wheel rim. Ensure the mounting-clips are seated firmly within the wheel cover blocks. See Fig. 2
	3. Position the new wheel cover on wheel rim and guide the tire valve stem through a slot in the wheel cover. Make sure all the wheel cover mounting-clips (4 or 5 clips) fit over the wheel rim. See Fig. 3
	4. Holding the wheel cover firmly in place, locate the mounting-clips of the wheel cover. Use the rubber mallet to tap the outer edge of the wheel cover mounting-clip until it is seated firmly against the wheel rim. See Fig. 4
	5. Repeat step 4. for each wheel cover mounting-clip until all the mounting-clips are seated firmly against the wheel rim.
	6. Use the tack puller or the slotted screwdriver to pry free each mounting clip from the wheel rim. See Fig. 5