Capadd Capads Adscap Adcap Add on cap Add a cap Hubads
Not rotate Non-rotating Display wheel cover Advertising hubcap Promotion hub cap
wheel cover hubcap abs wheel cover manufacturer center cap trim rim chrome trim ring hub cover spinner spinning wheel cover not rotating hubcaps hubcap hub cap advertising wheel cover Non-rotating hubcaps Non rotating hubcap Non-rotating wheel cover hub ads motion ads hub cap advertising stay still hubcap cap add on hubcap

®  Slimline wheel cover manufacturer since 1982

 

One day all wheel cover will be made in this way

50%--60% Freight Off 

USA PATENT NO.5,539,146

Dense pack - nested style EurolinE® wheel cover container load:

1x20'ft  13" 1750~1900 sets  14" 1450~1600 sets

15" 1400~1500 sets

1x40'HQ 13" 3860~4000 sets  14" 3800~3950 sets

15" 3100~3350 sets

 

Mr. Slim

EurolinE® Slimline package dimensions and container load capacity:
 


EurolinE®
Slimline 4PCS a SET in a COLOR BOX (set of 4 PCS)

13" 4pcs/set/box - 1 set in a color box/ 37.00x8.0x37.50cm / 0.40’cf/ 1.80  Kgs.

14" 4pcs/set/box - 1 set in a color box/ 39.50x8.0x40.10cm / 0.45’cf/ 2.00  Kgs.

15" 4pcs/set/box - 1 set in a color box/ 42.50x8.0x43.10cm / 0.52’cf/ 2.05  Kgs.

16" 4pcs/set/box - 1 set in a color box/ 44.50x7.5x45.10cm / 0.53’cf/ 2.80  Kgs.

 

EurolinE® Slimline 4PCS a SET in a COLOR BOX, 4 sets/boxes per Master carton

13" 4pcs/set/box - 4 sets per master carton 38.18x35.15x38.48cm / 1.82' cf / 6.20 Kgs.

14" 4pcs/set/box - 4 sets per master carton 41.21x37.57x41.51cm / 2.27' cf / 7.50 Kgs.

15" 4pcs/set/box - 4 sets per master carton 43.93x37.57x44.54cm / 2.60' cf / 8.50 Kgs.

16" 4pcs/set/box - 4 sets per master carton 45.75x31.51x46.36cm / 2.36' cf / 9.20 Kgs.

 

EurolinE® Slimline 4PCS a SET in a COLOR BOX, 5 sets/boxes per Master carton

13" 4pcs/set/box - 5 sets per master carton 16.34"X15.03"X15.15" / 2.16' cf /  7.50 Kgs.

14" 4pcs/set/box - 5 sets per master carton 16.34"X16.22"X16.34" / 2.51' cf /  9.00 Kgs.
15" 4pcs/set/box -
5 sets per master carton 16.34"X17.29"X17.41" / 2.85' cf / 10.25 Kgs.

 16" 4pcs/set/box - 5 sets per master carton 16.10"X18.01"X18.25" / 3.06' cf / 11.50 Kgs. 

 

EurolinE® Slimline wheel cover container load:

1x20'ft 13" 2204~2223 sets. 1x40' 13" 4375~4412 sets. 1x40'HQ 13" 4885~4927 sets.

1x20'ft 14" 1792~1806 sets. 1x40' 14" 3557~3586 sets. 1x40'HQ 14" 3972~4004 sets.

1x20'ft 15" 1577~1590 sets. 1x40' 15" 3131~3156 sets. 1x40'HQ 15" 3496~3524 sets.

1x20'ft 16" 1720~1737 sets. 1x40' 16" 3415~3448 sets. 1x40'HQ 16" 3813~3850 sets.


SlimLine™ Installation

1. The last two numbers on your tire will indicate proper wheel cover size
(12",13",14", 15", 16" and 17"). See Fig. 1
Example: A tire with a size code of 15 inch uses a 15 inch wheel cover
2. Remove used wheel cover (hubcap) from wheel rim.
Ensure the mounting-clips are seated firmly
within the wheel cover blocks. See Fig. 2
3. Position the new wheel cover on wheel rim and guide the tire valve stem
through a slot in the wheel cover. Make sure all the wheel cover mounting-clips
(4 or 5 clips) fit over the wheel rim. See Fig. 3
4. Holding the wheel cover firmly in place, locate the mounting-clips of the wheel cover. Use the rubber mallet to tap the outer edge of the wheel cover mounting-clip until it is seated firmly against the wheel rim. See Fig. 4
5. Repeat step 4. for each wheel cover mounting-clip until all the mounting-clips are seated firmly against the wheel rim.
6. Use the tack puller or the slotted screwdriver to pry free each mounting clip from the wheel rim. See Fig. 5

 

EurolinE® slimline™ wheel cover installation:

1. Remove old wheel cover from wheel rim.

2. Position the new wheel cover on the wheel rim, aligning the value cap.

         Make sure all clips fit over the wheel rim edge.

3. Holding the wheel cover firmly in place tap outer edge gently with your hand or a

         rubber mallet at clip locations to push the wheel cover onto the wheel rim.

         Continue until the wheel cover is seated completely on the rim.    PAT NO. M295046

 

Warning! Do not pull to remove cover, use a flat screwdriver to unclip the retainer clips

Caution: Use safety glasses for eye protection when installing or removing wheel covers.

 To remove the wheel cover, place a tack puller screwdriver (EU6400)
or a flathead screwdriver under the retaining clip and
pry away from the
wheel rim as the arrow suggests on the clip,

“in an upwards direction”. It is important that you do this on all
four/five clips to remove the wheel cover.

1. Identify your wheel size and determine correct wheel cover size.
2. If you have replaced the original factory wheels with aftermarket wheels your wheel cover size may differ from our application.

EurolinE® Wheel Cover  Traditional Wheel Cover  Spinner wheel/Hubcap

Steel Wheel-Replica  WireWheelCover  Spinner Wheel
Not rotating hubcap CapAds®       22.5"Hubcap

Home         Inquiry        e-Mail Us: autopure@ms3.hinet.net
 

Mexa Co., Ltd.   since 1979
The Best ABS Engineering Plastic Wheel Cover's Manufacturer in Taiwan
P. O. Box 30-534, Taipei 100, Taiwan, R. O. C.
Tel. +886-2-23657700 Fax.+886-2-23657702
Office: 3F., No. 128 Ku Ling Street (GuLing Street), Taipei 100, Taiwan, R. O. C.

Factory :No. 91 Kung Ming Road, Tsun Tou Liau Industry Area, Tainan, Taiwan Tel.06-2467820

www.autopure.com